Table of Contents
DD(1) User Commands DD(1)
NAME
dd – convert and copy a file
SYNOPSIS
dd [OPERAND]…
dd OPTION
DESCRIPTION
Copy a file, converting and formatting according to the operands.
bs=BYTES
read and write up to BYTES bytes at a time (default: 512); overrides ibs and obs
cbs=BYTES
convert BYTES bytes at a time
conv=CONVS
convert the file as per the comma separated symbol list
count=N
copy only N input blocks
ibs=BYTES
read up to BYTES bytes at a time (default: 512)
if=FILE
read from FILE instead of stdin
iflag=FLAGS
read as per the comma separated symbol list
obs=BYTES
write BYTES bytes at a time (default: 512)
of=FILE
write to FILE instead of stdout
oflag=FLAGS
write as per the comma separated symbol list
seek=N
skip N obs-sized blocks at start of output
skip=N
skip N ibs-sized blocks at start of input
status=LEVEL
The LEVEL of information to print to stderr; ‘none’ suppresses everything but error messages, ‘noxfer’ suppresses the final transfer statistics, ‘progress’ shows periodic transfer statistics
N and BYTES
may be followed by the following multiplicative suffixes:
c=1, w =2, b =512, kB =1000, K =1024, MB =1000*1000, M =1024*1024, xM=M, GB =1000*1000*1000, G =1024*1024*1024, and so on for T, P, E, Z, Y.
Each CONV symbol may be:
ascii
from EBCDIC to ASCII
ebcdic
from ASCII to EBCDIC
ibm
from ASCII to alternate EBCDIC
block
pad newline-terminated records with spaces to cbs-size
unblock
replace trailing spaces in cbs-size records with newline
lcase
change upper case to lower case
ucase
change lower case to upper case
sparse
try to seek rather than write the output for NUL input blocks
swab
swap every pair of input bytes
sync
pad every input block with NULs to ibs-size; when used with
block or unblock, pad with spaces rather than NULs
excl
fail if the output file already exists
nocreat
do not create the output file
notrunc
do not truncate the output file
noerror
continue after read errors
fdatasync
physically write output file data before finishing
fsync
likewise, but also write metadata
Each FLAG symbol may be:
append
append mode (makes sense only for output; conv=notrunc suggested)
direct
use direct I/O for data
directory
fail unless a directory
dsync
use synchronized I/O for data
sync
likewise, but also for metadata
fullblock
accumulate full blocks of input (iflag only)
nonblock
use non-blocking I/O
noatime
do not update access time
nocache
Request to drop cache. See also oflag=sync
noctty
do not assign controlling terminal from file
nofollow
do not follow symlinks
count_bytes
treat ‘count=N’ as a byte count (iflag only)
skip_bytes
treat ‘skip=N’ as a byte count (iflag only)
seek_bytes
treat ‘seek=N’ as a byte count (oflag only)
Sending a USR1 signal to a running ‘dd’ process makes it print I/O sta‐
tistics to standard error and then resume copying.
Options are:
–help
display this help and exit
–version
output version information and exit
AUTHOR Written by Paul Rubin, David MacKenzie, and Stuart Kemp. REPORTING BUGS GNU coreutils online help: <https://www.gnu.org/software/coreutils/> Report dd translation bugs to <https://translationproject.org/team/> COPYRIGHT Copyright © 2018 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. SEE ALSO Full documentation at: <https://www.gnu.org/software/coreutils/dd> or available locally via: info '(coreutils) dd invocation' GNU coreutils 8.30 September 2019 DD(1)
(資料來源,終端對於 DD 的說明:man DD)
延伸閱讀:DD 的實際應用(德文):https://wiki.ubuntuusers.de/dd